Mounting The Airstation On A Ceiling Or Wall - Buffalo WAPS-APG600H User Manual

Mounting the AirStation on a Ceiling or Wall

The AirStation can be mounted to a ceiling or wall. The location where you mount the AirStation should meet these
requirements:
• Mount in a location with an ambient temperature range from 0° C (32° F) to 45° C (113° F), humidity from 10% to
90%, and no condensation.
• Do not bring the AirStation into close contact with other devices, other walls, or other objects.
• Do not mount on wobbly surfaces, slanted surfaces, or other unstable locations.
• Do not mount in locations that are exposed to direct sunlight, heat sources, or electromagnetic waves.
• Mount in a firm and stable position. If the AirStation is not properly mounted, it can fall and cause an accident.
Use the supplied accessories below to mount the AirStation to the ceiling or wall.
• Ceiling-mounting screws (large)
• Wall-mounting screws (medium)
Note: The ceiling where the AirStation is mounted must be capable of supporting a weight of at least 1.5 kg (3lb
5oz). If the ceiling does not have sufficient strength, be sure to reinforce the ceiling before securing the AirStation to
it. If the ceiling is not reinforced, the AirStation can fall and cause an injury.
If the screws cannot be properly secured to the wall, such as when the wall material is thin, open holes in the wall
beforehand, embed the wall-mounting anchor into the wall, and then secure with the screws.
20