I'm Here - Buffalo WAPS-APG600H User Manual

System
Model
AirStation Name
Boot from
Application Version
MAC Address
Management VLAN ID
IP Address
Default Gateway
DNS
DHCP Server
Wired LAN Port
Wireless
Status
MAC Address
Channel
Transmit Power
SSID
Authentication Method
Encryption Type
VLAN ID
Additional Authentication
Wireless Client Isolation
WDS Settings

I'm Here

This will cause your AirStation to beep. If you have multiple AirStations, this can make it easy to determine which one
you're currently configuring.
Diagnostic - I'm Here
Duration of Sound
Displays the product model name.
Displays the AirStation's name.
Displays startup device of the AirStation.
Displays firmware version.
Displays the MAC address.
Displays management VLAN ID.
Displays AirStation's IP address.
Displays the IP address of the default gateway.
Displays the IP address of the DNS server.
Displays the IP address of the DHCP server.
Displays the status of the wired port (#1) and wired port (#2).
Displays the wireless connection status.
Displays the MAC Address.
Displays current channel.
Displays output power setting.
Displays the SSID.
Displays the authentication method.
Displays the encryption type.
Displays the VLAN ID.
Displays the status of additional authentication.
Displays wireless client isolation status.
Displays the WDS status.
If WDS is enabled, displays access points available for communication.
Specify the ring time. You may enter 1-300 seconds. The default value is
10 seconds.
59