Buffalo WAPS-APG600H User Manual page 36

SSID1 - SSID5
Auto Channel
Auto Channel Range
Channel
Auto Channel Interval
Channel Bandwidth
BSS BasicRateSet
Enter the SSID and VLAN ID. A roaming environment can be built by
installing multiple AirStations with the same SSID over a wide area.
1 to 32 single-byte alphanumeric characters and single-byte symbols can
be entered. It is case-sensitive. The VLAN ID can be set to an integer value
from 0 to 4094.
Note: To set SSID2 to SSID5, enable the numbers corresponding to
"Enable SSID#".
Select whether enable or disable auto-channel. When enabled, vacant
channels can be automatically detected.
Specify the channel range used in the 2.4 GHz or 5 GHz band wireless
LAN.
Specify the channel used in the 2.4 GHz or 5 GHz band wireless LAN.
If there are any wireless devices using a nearby frequency in the
surrounding area, communication can be adversely affected. If the
communication speed is slow, try changing the channel.
Note: If W53 (52, 56, 60, or 64 ch) or W56 (100, 104, 108, 112, 116, 120,
124, 128, 132, 136, or 140 ch) is selected, the DFS (Dynamic Frequency
Selection) is automatically enabled to prevent crosstalk with weather
and flight control radar and similar equipment. When enabled, if the
AirStation detects crosstalk, wireless communication may be temporarily
stopped for about 1 minute to prevent interference with radar.
Specify the interval for changing the channel when auto-channel
is enabled. When "Change channel even if clients are connected" is
checked, the channel is changed even if the client is connected to the
AirStation.
Specify the channel bandwidth.
Select the communication speed of the management and control
communication frame for the AirStation and wireless device.
The following speeds are available in the 802.11g standards:
• 1, 2 Mbps
• 1, 2, 5.5, 11 Mbps (default setting)
• 1, 2, 5.5, 6, 11, 12, 24 Mbps
all (1, 2, 5.5, 11, 12, 18, 24, 36, 48, 54 Mbps)
The following speeds are available in the 802.11a standards:
• 6, 12, 24 Mbps (default setting)
all (6, 9, 12, 18, 24, 36, 48, 54 Mbps)
If communication cannot be performed when set to "all", return to the
default setting.
36