Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
refer to figures 2–6 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
Electrical Controls
a
d
figure 2. Electrical controls.
A. Spindle Speed Dial: starts and stops spin-
dle rotation, and controls spindle speed when
rotated. rotate fully counterclockwise to turn
oFF. rotate fully clockwise to maximize
spindle speed.
b. fault Indicator Light: illuminates if chuck
guard is opened during spindle rotation.
Close guard and turn spindle speed dial oFF
to reset indicator.
C. power Light: illuminates when machine is
connected to power.
D. Emergency Stop button: Cuts power to
motor and electrical controls when pressed.
remains depressed until reset by twisting
clockwise.
-4-
manual
bEfORE
B
C
Tailstock
F
E
figure 3. tailstock controls.
E. Tailstock Quill: holds centers or tooling.
f.
Quill Lock Screw: secures the quill.
G. Tailstock Quill Handwheel: Moves the
mounted center toward or away from the
workpiece.
H. Tailstock Lock: secures tailstock to bedway.
Carriage
i
K
figure 4. Carriage controls.
I.
Tool post: holds tooling.
J.
Carriage Lock Screw: secures the carriage
for greater rigidity when it should not move.
K. Cross Slide Handwheel: Moves the tool
toward and away from the workpiece.
Model G0745 (Mfg. Since 11/13)
g
h
J