Honeywell Mercury User Manual page 32

Modem Configuration Program (DOS)
MODEM TIMING
Wait for Dial Tone:
Specifies the amount of time (in seconds) the modem will wait for the
dial tone, when attempting a call-in to the host computer. Default is:
2 seconds, range: 2 - 255 seconds.
Wait for Carrier:
Specifies the number of seconds the modem waits for the carrier from
the answering modem. Default is: 30 seconds, range: 1 - 255 seconds.
Comma Delay:
Specifies the number of seconds to pause for each comma (,) encoun-
tered in a dial string. The default is: 2 seconds, range: 1 - 255 seconds.
No Activity Time-out:
After the communication link has been established, this number
specifies the amount of time (in minutes) the modem retains a
transparent connection. The default is: 10 minutes, range: 1 - 30
minutes, or 0 to disable.
Page 32
www.honeywell.com
32