Honeywell Mercury User Manual page 33

Modem Configuration Program (DOS)
ALARMS SETUP
Battery Low Enable:
Select "Y" (for Yes) to enable the modem to dial into the host computer
to report a modem low battery alarm. Select "N" (for No) to disable
this feature. The alarm call-in must also be enabled.
Alarm Call-In Enable:
Select "Y" (for Yes) to enable the modem to call into the host computer
using the Call-In Phone Number, when an alarm signal is received. The
alarm signal can either be the Low Battery Alarm or Alarm Pulse
received at the alarm channel input. Select "N" (for No) if the alarm
call-in feature is to be disabled.
Page 33
33