Configuring The Modem - Honeywell Mercury User Manual

Configuring the Modem

Connect the modem configuration cable (p/n 40-2200) from the
computers serial port to J2 port on the Mercury Modem. The modem
is no longer in Sleep Mode when the cable is plugged in. LED
indicators (#1 & #7) are "On" and the modem cannot be used for
communications while the configuration cable is plugged in.
Page 26
www.honeywell.com
26
Serial Port
(i.e.COM1,COM2,)
Female D Connector
Receptacle
I/O Cable
P/N 40-2200
J2
DE-9S
Socket
Connector
Male D Connector
Receptacle
Laptop Computer
Mercury Modem
Figure 9