Honeywell Mercury User Manual page 36

Page 36
www.honeywell.com
36
Modem Configuration (WINDOWS)
Modem ID
Modem ID is a unique identifier assigned by the user to identify a
modem's location, attached instruments, etc., to the alarm collection
system. The assigned number is completely up to the user, but must
not be duplicated at other sites in the same alarm collection system.
The default value is (None), numbers less than 8 digits will be zero-
filled on the left.
Call-In Phone Number
Call-In Phone Number is the phone number for the host modem/
computer running the alarm collection system. The modem will dial
the number if an alarm condition occurs. The number may contain any
of the standard calling parameters allowed by a standard Hayes
compatible modem. Up to 37 characters may be entered into this field
to accommodate long distance or pager dialing. For example; (0-9)
are numbers available, (W) is "Wait" for dial tone and a (,) pauses
during dial for a specified amount of time. The default Call-In Phone
Number is: (Blank).
Figure 19
Figure 20