Need Help - Honeywell Mercury User Manual

Page 50
www.honeywell.com
50

Need Help?

If you encounter a problem while installing or using the Mercury Modem,
follow these steps:
HOST COMPUTER:
1. Make sure your computer, your modem and the cables that
connect them are working properly.
2. Make sure you're not running software that may conflict with using
the communication ports.
3. In the Link package for the instrument you are calling, go into
Setup on the main menu line. Select Communications and insure
that the Modem Connection section is correct.
Baud Rate
Connector
Modem Init String
Dial Type
Dial Prefix
= 2400
= Comm port host modem is using
= Blank
= Tone or Pulse
= If required