Place Call Using Fast Dial; Hold; Hold Active Call - Cisco 8831 User Manual

Place call using Fast Dial

Related Topics
User Options web pages, on page 65
Place call using Fast Dial
Before you can use Fast Dial on the conference station, it must be set up on your User Options web pages.
Procedure
Step 1 Press Contacts.
Step 2 Sign in to Personal Directory.
Step 3
Select Personal Fast Dials.
Step 4 Select a fast-dial code and then press Call.

Hold

Hold allows you to put an active call into a held state. Your phone allows one active call at a time; other calls
are put on hold.

Hold active call

Procedure
Step 1 To put an active call on hold, press Hold.
The Hold icon
Step 2 If there is only one call on hold and you are not on an active call, press Resume.
Step 3 If you are already on an active call, press Swap.
The holding call becomes active, and the active call is placed on hold.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
52
displays as a status icon.
Calling features