Speed Dial; Place Call Using Speed Dial Codes; Transfer; Transfer Call To Another Number - Cisco 8831 User Manual

Speed Dial

Speed Dial

Speed-Dial features allow you to quickly place a call using preconfigured codes to place a call, or by selecting
an item from the Call History list. Before you can use speed-dial features on the conference station, you must
set up Speed Dial on your User Options web pages. The conference station allows 10 speed-dial entries.
The conference station supports these speed-dial features:
• Speed-dial codes: Allows you to dial a phone number from a code (sometimes referred to as abbreviated
Related Topics
Speed Dial setup on web, on page 70

Place call using speed dial codes

Before You Begin
Before you can use speed-dial codes on the conference station, you must set up the codes on your User Options
web pages.
Procedure
To place a call, enter the speed-dial code and press the Speed Dial.

Transfer

Transfer allows you to redirect a connected call from the conference station to another number.
Before completing a transfer procedure, you can press Cancel to cancel the procedure.

Transfer call to another number

Before You Begin
The call must be active to be transferred.
Procedure
Step 1 Press Transfer.
Step 2
Enter the destination number or press a speed-dial button.
Step 3 Wait for the recipient to answer.
Step 4 Press Transfer again.
The transfer completes.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
62
dialing or fast dialing).
Calling features