Change Voice Message Indicator Setting Per Line; Change Audible Voice Message Indicator Setting Per Line; Change Ring Type - Cisco 8831 User Manual

User Options web pages

Change voice message indicator setting per line

Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2 Select a phone from the Name drop-down menu.
Step 3 Select Line Settings.
Step 4 (Optional) If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
Step 5 In the Message Waiting Lamp area, choose from various settings.
Typically, the default message waiting setting prompts your phone to display a steady red light from the
handset light strip to indicate a new voice message.
Step 6 Select Save.

Change audible voice message indicator setting per line

Procedure
Step 1 On your User Options web page, select User Options > Device.
Step 2 Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4 If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5 In the Audible Message Waiting Lamp area, choose from various settings.
Step 6
Select Save.

Change ring type

When the conference station is idle, an incoming call rings uses the idle ring setting. When the conference
station is active, an incoming call rings uses the consecutive ring setting.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
Line settings on web
75