Spectra Ecm - GE EPM 7300 Installation Manual

Spectra ECM

Feature
Display Window
CONTRAST
Buttons
Refresh Button
SCROLL
Buttons
SELECT/EXIT
Button
78
The large faceplate representation of the Spectra ECM provides the following
animated functions:
Function
Opens the tabular data window specified during wizard
configuration and sets the view to the Monitoring page.
Open the tabular data window specified during wizard
configuration and sets the view to the Setup page.
Updates the display to the most current readings.
Loop through all selections for each of the valid modes
accessed by the SELECT/EXIT button.
Displays the top-line message "Press SELECT for". Press
one of the SCROLL buttons to rotate among the four
modes. Press SELECT/EXIT to display the first value of
the current mode and the SCROLL buttons for all other
values available in that mode. Press again to redisplay the
"Press SELECT for" prompt for mode selection.
Table 6. Spectra ECM Faceplate animated functions.
The modes and the parameters available in each mode are as follows:
PMCS Interface Toolkit