GE EPM 7300 Installation Manual page 85

Mode
RMS Current
RMS Voltage L-N
RMS Voltage L-L
Watts
Vars
Volt-Amps
Power Factor
Watt-Hours
VAR-Hours
Current Demand
Peak Current
Watt Demand
Peak Watt Demand
Frequency
Harm Distortion
77
The parameters available with the SCROLL buttons are listed below:
Description
Units in Amps; phase shifting among A, B, and C.
Units in Volts; available only in Wye configuration, with phase shifting
among A, B, and C.
Units in Volts; phase shifting among AB, BC, and CA.
Units in kW; phase shifting among A, B, C, and total.
Units in kVARs; phase shifting among A, B, C, and total.
Units in kVA; phase shifting among A, B, C, and total.
No units; no phase shifting.
Units in kWH; no phase shifting.
Units in kVARH; no phase shifting.
Units in A; phase shifting among A, B, and C.
Units in A; phase shifting among A, B, and C.
Units in kW; no phase shifting.
Units in kW; no phase shifting.
Units in Hz; no phase shifting.
Value area of display is blank; degree of harmonic distortion is shown as
negligible, mild, moderate, or severe.