Setup Two Tab - GE EPM 7300 Installation Manual

• Meter Setup
• Limits Set By
Relay 1 / Relay 2
• Phase Reversal
• Phase Imbalance
• Delay On
• Delay Off
Decimal Placement
• Volts Decimal Placement
• Amps Decimal Placement
• WATT Decimal Placement
• VOLTS Full Scale
• AMPS Full Scale
• Lim. Threshold for lmb (%)
Reset
• WATT Hour
• VAR Hour
• VA Hour
If it is kilo volt inputs, the decimal placement is 2 (as shown in the screen); if kilo amp input the decimal placement is 3
and if mega watt input, it is 1.
Note: Configured is displayed in green, Enabled in red and Reset in Amber.

Setup Two Tab

The screen explains various parameters related to Limits and Triggers:
Brief explanation of each of the columns is described below
Column Description
237