GE EPM 7300 Installation Manual page 40

Two steps remain after the wizard has been configured.
First, InTouch DDE Integer tags must be created for the DDE items configured in the
Event Logger corresponding to the Alarm Panels. Make sure the DDE Item names
created in InTouch match the DDE Item names configured in Event Logger. (If you
are unsure of how to create DDE tags in InTouch, please refer to WonderWare's
documentation.) The DDE Access name for the Event Logger should be configured
in InTouch as follows:
Second, an InTouch script must be written to associate the InTouch indirect tags
created by the wizard with the InTouch DDE tags created for DDE Items in Event
Logger. Typically, this script is placed in the InTouch "On Startup" application
script.
32 PMCS Interface Toolkit