Min/Max - GE EPM 7300 Installation Manual

PF.
•
Frequency Normal/ High Speed: Displays Frequency in Hz.

Min/Max

The tab displays Maximum and Minimum values of various parameters. The user can get maximum and minimum values
by clicking on respective buttons labeled Show Max and Show Min.
•
Voltage: This tab displays the voltage values of AN, BN, CN, AB, BC, CA and Aux.
•
Current: Displays currents of Phase A, B, C, measured and calculated.
•
THD : Displays THD values of Phase A, B, C for Voltage and Current an d K Factor.
•
Power Factor : Displays PF of Phase A, B, C and 3 Phase of 4 Quadrants namely Q1, Q2, Q3 and Q4.
•
Power: Displays Phase A, B, C and 3 Phase Power Values for Positive Watt, Coincendence VAR for Postive Watt,
Negative Watt, Coincedance VAR for Negative Watt, Positive VAR, Negative VAR and VA.
242 PMCS Interface Toolkit