565 Feeder Management Relay - GE EPM 7300 Installation Manual

565 Feeder Management Relay

198
The 565 Tabular Data Screen wizard has the following buttons on the Command tab:
Tab Button
Command Maint Data
Operation Data
Amp Demand
KW Demand
KVAR Demand
Events
Energy
Reset Keypad
End of Relay Test
End of LED Test
End of Analog Output Test
Test LCD Display
Test LEDs
Table 27. 565 Tabular data screen commands.
The Setup 2 tab has two data input areas. Analog Input Title creates a user label for
the analog input used in the device. Analog Input Units performs the same function
for the units of the analog input. These labels appear on the Metering tab and on the
Large Faceplate wizard when the analog input is displayed. The analog input can be
Function
Clears the maintenance data
Clears the operation data
Clears the amp demand registers
Clears the kW demand registers
Clears the kVAR demand registers
Clears the events table
Clears the energy used data
Performs a keypad reset
Ends the relay test
Ends the LED test
Ends the analog output test
Sends a test pattern to the LCD
Starts the LED test
PMCS Interface Toolkit