369 Motor Management Relay; Metering Tab - GE EPM 7300 Installation Manual

369 Motor Management Relay

176

Metering Tab

369 - Metering Data Screen
The Metering tab displays the following metered values from the 369 device: Actual
Values for Voltage, Current, Power, Power Factor, and Frequency. These values are
detailed below.
Current
•
Per phase magnitude and angle
•
Phase average
•
Ground current
•
Motor Load as a percentage of the Full Load Current rating defined in setpoints.
•
Thermal Capacity used in percent
•
Estimated time to trip
•
Current Unbalance ratio
Voltage
Voltage values are only displayed if the Metering or Backspin option is installed in
the relay, and if a voltage transformer (VT) connection has been programmed in the
relay.
Line - Line voltage magnitude.
Average Line-Line voltage.
Line – Neutral voltage magnitude and angle (only shown for wye configurations)
PMCS Interface Toolkit