GE EPM 7300 Installation Manual page 20

Enter the unique eight- character
name matching the appropriate
Topic in the PMCS DDE Server.
12
EPM 7700
The EPM 7700 Tabular Data Dialog box is slightly different from the other PMCS
device types, containing two extra fields and requiring minor differences in
configuration. The Tabular Data Dialog for the EPM 7700 is shown below, followed
by the special configuration requirements.
The Node Name field requires that you enter the name of the computer running the
Communications Server that connects to this particular device. Depending on the
configuration of the EPM7700 network, this can be either the Primary node
computer, or a computer setup as a "Full Station" Secondary node. Refer to DEH-
Use the Group Name field to logically group devices,
if desired. Enter the name of the group to which the
device belongs.
Enter the application name of
the PMCS DDE Server
(GE32MODB or GE32MTCP).
Enter the minimum security level
for enabling remote command
and setup functions.
Enter the name of the window to
be opened when the Trend
button is clicked on during
runtime.
Enter the name of the window to
be opened when the Setup
button is clicked on during
runtime.
PMCS Interface Toolkit