Spectra Microversatrip Trip Unit; Mode Description - GE EPM 7300 Installation Manual

Spectra MicroVersaTrip Trip Unit

Click on...
Display
Window
FUNCTION
Button
ENTER Button
VALUE Button
SELECT
Button
Mode
AMPS
VOLTS
ENGY
PWR
FREQ
71
The large faceplate representation of the Spectra MicroVersaTrip trip unit provides
the following animated functions:
Function
Opens the tabular data window specified during wizard
configuration and sets the view to the Normal Monitoring
page.
Opens the tabular data window specified during wizard
configuration and sets the view to the Setup page.
Opens the tabular data window specified during wizard
configuration and sets the view to the Setup page.
Changes phases in appropriate modes, depending on
whether the device has been configured as Wye or Delta
Phase is indicated by letters in the upper right of the
display; press VALUE to display a different phase.
Rotates among six different modes, as shown in the lower
left of the display, with units in the lower right.
Table 2. Spectra MVT Faceplate animated functions.
The metering modes available with the SELECT button are as follows:
Description
Current, with no label in the units area of the display. Phase shifting in both
Delta and Wye configurations.
Voltage, displayed as line-to-line (V
for Wye. Phase shifting in both configurations.
Energy, displayed in kWh; no phase shifting.
Real power indicated by non-blinking units symbol (kW). Apparent power
indicated by blinking units symbol. Phase shifting in Wye configuration.
Frequency, displayed in Hz. Phase shifting in both Delta and Wye
configurations.
) for Delta and line-to-neutral (VL-N)
L-L