Cisco IPS 7.1 Installation Manual page 28

How the Sensor Functions
Table 1-2 Interface Support (continued)
Base Chassis
IPS 4510
IPS 4520
1. To disable hardware bypass, pair the interfaces in any other combination (2/0<->2/2 and 2/1<->2/3, for example).
2. To disable hardware bypass, pair the interfaces in any other combination (2/0<->2/2 and 2/1<->2/3, for example).
3. Reserved for future use.
4. To disable hardware bypass, pair the interfaces in any other combination (2/0<->2/2 and 2/1<->2/3, for example).
5. Does not currently support hardware bypass.
6. Reserved for future use.
The IPS 4260 supports a mixture of 4GE-BP, 2SX, and 10GE cards. The IPS 4270-20 supports a mixture
Note
of 4GE-BP, 2SX, and 10GE cards up to a total of either six cards, or sixteen total ports, which ever is
reached first, but is limited to only two 10GE card in the mix of cards.
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
1-10
Added Interfaces Supporting
Interface Inline VLAN Pairs
Cards (Sensing Ports)
— GigabitEthernet 0/0
GigabitEthernet 0/1
GigabitEthernet 0/2
GigabitEthernet 0/3
GigabitEthernet 0/4
GigabitEthernet 0/5
TenGigabitEthernet 0/6
TenGigabitEthernet 0/7
TenGigabitEthernet 0/8
TenGigabitEthernet 0/9
—TX GigabitEthernet 0/0
GigabitEthernet 0/1
GigabitEthernet 0/2
GigabitEthernet 0/3
GigabitEthernet 0/4
GigabitEthernet 0/5
TenGigabitEthernet 0/6
TenGigabitEthernet 0/7
TenGigabitEthernet 0/8
TenGigabitEthernet 0/9
Chapter 1
Combinations Supporting
Inline Interface Pairs
All sensing ports can be
paired together
All sensing ports can be
paired together
Introducing the Sensor
Interfaces Not
Supporting Inline
(Command and Control
Port)
Management 0/0
6
Management 0/1
Management 0/0
6
Management 0/1
OL-24002-01