Table of Contents
Advertisement
Chapter 7
Installing the IPS 4510 and IPS 4520
Step 5
Tighten the screws to secure the chassis to the rack
chassis to the rack.
a.
For square hole racks, secure the chassis to the rack by installing the #10-32 screw into the cage nut
that you installed in Step 3.
b.
For threaded hole racks, secure the front of the chassis by installing the #10-32 screws into the rack
threaded hole.
Figure 7-13 Securing the Chassis to the Outer Rail
OL-24002-01
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
Installing and Removing the Slide Rail Kit
(Figure
7-13). Use the upper hole to secure the
7-27
Advertisement
Table of Contents
Troubleshooting
