Cisco Wide Area Virtualization Engine 594 and 694 Installation Manual page 32

Rack Mounting and Cabling the WAVE-594 and WAVE-694
Attach the rear mount bracket holders (item #3 in
Step 4
rack screws (item #6 or #7 in
Figure 3-2
Insert the chassis between the mounting posts and secure (see
Step 5
Insert the chassis into the rack with the rear rack mount holders sliding into the rear rack mount
a.
brackets.
Align the mounting holes in the front brackets with the mounting holes in the equipment rack.
b.
Secure the chassis using four (two on each side) rack screws (item #6 or #7 in
c.
the holes in the front brackets and into the threaded holes in the mounting post.
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
3-4
Table 3-1). (see
Attaching Rear Rack Mount to the Rack
Chapter 3 Installing the WAVE-594 and WAVE-694
Table 3-1) to the rear rack posts using four appropriate
Figure 3-2)
Figure 3-3):
Table 3-1) through
OL-24619-02