Table of Contents
Advertisement
Country Region
Code
No forwarding
among wireless
clients
Hide SSID
Allow BW 40
MHz
Beacon(ms)
TX Power
Idle Time
To save changes, click the Apply button. Or you can click Default to reset all values to
factory default value.
VigorN65 User's Guide
The available channels are differed from countries. It is restricted to
change. Here you can see the channel setting of the access point. For
example:
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Check this box and wireless clients will not be able to share data with
each other.
Check this box and the SSID will not be broadcasted to the public.
Your wireless clients must know the exact SSID to be able to connect
to your computer. This option is useful to enhance security level.
Check this box to allow BW 40MHz capability.
You can define the time interval that a beacon signal should be send.
Default value is 100. Do not modify this value unless you know what
will be affected.
You can select the wireless output power here. Please select a proper
output power setting according to your actual needs. You may not
need 100% of output power if other wireless clients are not far from
you.
Select the idle time for the wireless access point. Default value is 300.
Do not modify this value unless you know what will be affected.
49
Advertisement
Table of Contents
