Table of Contents
Advertisement
3.
If the wireless access point uses encryption, you will be prompted to input its WEP key
or WPA preshared key.
4.
Please ask the owner of the wireless access point you want to connect, and input the
correct key here and then click OK. By checking Show Password box, the encryption
key you inputted here will be displayed.
If the value you inputted here is wrong, you will not be able to connect to this wireless
access point.
Authentication type will be selected by the authentication type of the access point
automatically, please don't change it.
However, if you're connecting to an access point uses 802.1x authentication, you have to
check 802.1x box and input related information. Instructions for 802.1x authentication
will be given later.
5.
If the wireless access point is successfully connected, you'll see a
front of the name of wireless device.
VigorN65 User's Guide
23
symbol appears in
Advertisement
Table of Contents
