Table of Contents
Advertisement
Here are descriptions of every setup item:
Item Name
EAP Method
Tunnel
Authentication
Session
Resumption
Description
Select 802.1x EAP method from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a correct
EAP method.
Select 802.1x tunnel authentication type from dropdown menu. Please
ask the administrator of the access point you wish to connect to select a
correct tunnel authentication method. This pull down menu is only
available when authentication type you use is PEAP, TLS / Smart
Card, or TTLS.
When you use EAP-FAST as authentication type, the tunnel
authentication type is always Generic Token Card and can not be
changed. You also need to select Soft Token or Static Password as
password in Authentication ID \ Password setting.
EAP-FAST authentication type also have a sub-menu to set EAP
fast-specific parameters:
If you need to use protected authentication credential, check Use
protected authentication credential box, and click Import to
load .pac credential file; to remove a loaded credential file, click
Remove.
You can enable or disable session resumption here. If you don't know if
you should enable session resumption or not, please ask your 802.1x
authentication administrator.
28
VigorN65 User's Guide
Advertisement
Table of Contents
