Table of Contents
Advertisement
ID \ Password tab
Client
Certification tab
Server
Certification tab
After you complete all information related to the access point, click OK to save the profile, or
click cancel to cancel adding a new profile.
If the profile is created, you will see the information in the Profile List.
VigorN65 User's Guide
Input 802.1x username (ID) and password and other information if it is
required here. Click Show Password to show the password you typed.
Use this tab to select a local certificate from dropdown menu. If the
access point you wish to connect required a specific client certificate,
the certificate must be installed on your computer, and you can select
the certificate here.
Use this tab to use server-based certification. Please select a CA
(Certificate Authority) from dropdown menu. If intermediate
certificates are allowed, please select Allow intermediate certificates.
Also, if you need to specify CA server's name, you can specify it in
Server name field. You can select Server name must match, so the
CA server's name must be the same with the value you set in Server
name field; If only the domain name part of full server name must the
same with the value you set in Server name field, select Domain name
must end in specified name.
29
Advertisement
Table of Contents
