6.
All wireless access points in proximity will be displayed here. If the access point you
want to use is not displayed here, please try to move your computer closer to the access
point, or you can click Refresh network list to rescan access points. Click the access
point you want to use if it is shown, then click Connect.
7.
If the access point is protected by encryption, you have to input its security key or
passphrase here. It must match the encryption setting on the access point.
If the access point you selected does not use encryption, you'll not be prompted for
security key or passphrase.
32
VigorN65 User's Guide