Table of Contents
Advertisement
2.
Click WPS Configuration menu, and the following settings will appear.
3.
The PIN code of your wireless network card is an eight-digit number located at the
upper-right position of configuration utility. Remember it, and input the number to your
wireless access point as the WPS PIN code (Please refer to the user manual of your
wireless access point for instructions about how to do this).
NOTE: If you experienced problem with the pin code provided here, you can click
Renew to get a new pin code.
4.
Click PIN button now, and wait for few seconds to one minute. If a wireless access point
with correct PIN code is found, you'll be connected to that access point.
5.
You may have to click PIN for few more times to try again. If you still can not connect
to access point by this way, please make sure the PIN code you provided to access point
is correct.
There are also some options available for WPS configuration:
Auto: When in PIN mode, wireless access point to be connected will be selected
automatically if this box is checked.
42
VigorN65 User's Guide
Advertisement
Table of Contents
