Table of Contents
Advertisement
If you can not see the access point you wish to connect here, please click Rescan button to
scan for access point again, until the one you preferred is displayed. You may have to click
Rescan for more than two times before you can see the access point you wish to use here.
If you still can not see the access point you wish to use after clicking Rescan for more than
five times, please move your computer closer to the location where the wireless access point is,
or see instructions in Chapter 4-2 Troubleshooting.
If you wish to see detailed information for a specific access point, please double-click on it,
and you'll be provided with its detailed information.
There are 3 types of technical information:
General: Displays basic information about this access point, such as SSID, MAC Address,
authentication / encryption type, channel etc.
WPS: If this access point supports WPS (Wi-Fi Protected Setup), related information will be
displayed here.
802.11n: If this access point complies with 802.11n, related information will be displayed
here.
And here are descriptions of every setup item in setup area:
Item Name
Sorted by >>
Show dBm
Rescan
VigorN65 User's Guide
Description
You can decide how to sort all listed access point by SSID, Channel, or
Signal (signal strength).
Check this box to show the signal strength of access point, instead of
percentage.
Click this button to rescan access points. You can click this button for
several times, if the access point you wish to use does not show in the list.
21
Advertisement
Table of Contents
