Table of Contents
Advertisement
Encryption
WPA Preshared
Key
WEP Key
Show Password
Use 802.1x
To set 802.1x authentication for the access point, please click 802.1X tab:
VigorN65 User's Guide
If you select LEAP, you'll be prompted to input LEAD specific
settings:
Please input LEAP identity, password, domain name, and select
encryption type. You can check Show Password box so the password
you inputted will be displayed as you type, but not replace by asterisk.
Select the encryption type of the wireless access point or wireless
device you wish to connect. When you're adding a profile from an
existing access point or wireless device, the encryption type will be
selected automatically, and please do not modify it.
Input WPA preshared key here. If encryption is not enabled, or you
select WEP as encryption type, this field will be disabled and grayed
out.
You can select key type (Hexadecimal or ASCII) and input WEP key
here. If encryption is not enabled, or you select WPA as encryption
type, this field will be disabled and grayed out. You can set up to 4
WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII. For
Hexadecimal key, you can input number 0-9 and alphabet a-f; for
example, 001122aabbcc; For ASCII key, you can input number 0-9 and
alphabet a-z; for example, mywepkey12345.
The length of WEP key depends on the type of WEP key you selected.
You can input 10 or 26 hexadecimal characters and 5 or 13 ASCII
characters as WEP key.
Check this box and all passphrases or security keys you inputted will be
displayed as you type, but not replace your input with asterisk.
If the access point you wish to connect requires 802.1x authentication,
please click on Use 802.1x box, then click 802.1X tab to set 802.1x
parameters.
Note: Such check box will not be shown if the wireless AP you want to
connect does not invoke such feature.
27
Advertisement
Table of Contents
