Table of Contents
Advertisement
7. Please wait while the install procedure is running. When you see this message, please
click Finish to complete the driver installation process.
8. After installation is complete, wireless configuration utility will be shown in the desktop
of your computer automatically. You will also see an icon at the lower-right corner of
your windows system. If you put the mouse cursor on the icon, the status of wireless card
will be displayed as a popup balloon.
9. When you want to configure your wireless connection, please right click on this icon, and
a popup menu will appear. You can click Launch Config Utility to start configuration
program.
If you want to close the configuration utility, please click Exit.
10. Please note that if you stopped config utility by Exit function, you'll not be able to
maintain the wireless link to the access point you wish to use. In this case, you can start
config utility again from Start >> All Programs>>DrayTek VigorN65>>VigorN65
Utility, as shown below.
14
VigorN65 User's Guide
Advertisement
Table of Contents
