Section 4: Controls; Spindle Speeds - Grizzly G4002 Owner's Manual

SEcTiON 4: cONTROLS

Spindle Speeds

Never change speeds while spindle or motor
is in motion.
the speed of the spindle is controlled by the posi-
tions of the speed control knobs. see figure 12.
By positioning the knobs using the chart in Figure
8, you can achieve all of these speed ranges:
70, 200, 220, 270, 360, 600, 800, 1000 and 1400
rpM.
figure 12. speed shifting levers.
Model G4002/G4003 (Mfg. Since 8/12)
figure 13. speed chart.
the chart above shows the various combinations
of knob positions for achieving a desired speed.
Example:
to select a spindle speed of 600 rpM, move the
left-hand selector knob until the indicator arrow on
its hub is pointing to the "C". Move the right-hand
selector knob until its indicator arrow is pointed at
the "3".
-23-