Unpacking; Needed For Setup; Piece Inventory - Grizzly G4002 Owner's Manual

unpacking

Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a fork lift (or other
lifting equipment) rated for
weight of this machine.

Needed for Setup

the following are needed to complete the setup
process, but are not included with your machine.
Description
• Additional people ........................................1
• safety glasses ................1 For each person
• Cleaner/degreaser (page 17) .....As Needed
• Quality Metal protectant ..............As Needed
• disposable shop rags ................As Needed
• precision level ............................................1
• lifting straps (rated for at least 1300 lbs.) ..2
• Forklift/power lifting device (rated for at least
1300 lbs.) .....................................................1
• Bench or stand Mounting hardware
....................................................As Needed
-16-
HEAvy LifT!
Qty

piece inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
inventory contents:
• lathe
• 6" 3-jaw Chuck
• 8" 4-jaw Chuck
• Face plate
• steady rest
• Follow rest
• Quick Change tool post
• tool holder
• toolbox
• Metric Allen® Wrenches
• straight Blade screwdriver
• phillips® screwdriver
• oil can
• 26t gear
• 27t gear
• 35t gear
• 2- 40t gear
• 45t gear
• 50t gear
• Chuck wrenches (2)
• reverse Jaws for the 3-Jaw Chuck
• dead Center - Mt #3
• live Center - Mt #3
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
Model G4002/G4003 (Mfg. Since 8/12)