Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 69

The date and time are set at tile f_ctory. Set the time according to the local time in your
country. If you do not use the camcorder for about six months, tile date and time settings
may be released (bars may appear) because tile vanadium lithium battery installed in tile
camcorder will have been discharged. In this case, first charge tile vanadium lithium
battery, then reset tile date and time.
(1) While pressing the small green button on tile POWER switch, set it to CAMERA.
(2) Press MENU to display tile menu on tile LCD screen OT" in tile viewfinder.
(3) Select CLOCK SET, then press the CONTROL dial.
(4) Turn tile CONTROL dial to adjust the year, and then press the CONTROL dial.
(S) Set tile month, clay, hour and minutes by turning and pressing tile CONTROL dial.
(6) Press MENU to erase tile inenu display.
CONTROL
0
5'
3
O
CONTROL CONTROL
* t t ]
t t t _
CONTROL CONTROL CONTROL CONTROL
CONTROL CONTROL CONTROL CONTROL
To correct the date and time setting
Repeat steps 2 to 5.
The year indicators changes as follows:
_'1993_1999_2()01 ..... _2029_
Note on the time indicator
The internal clock of this camcorder operates on a 12 hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands fbr noon.
69