Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 50

Connect the camcorder to your VCR or TV to watch tile playback picture on tile TV screen.
When monitoring tile playback picture by connecting the camcorder to yotu TV, we
recolllll-lend you to use house current for the power source.
i
()pen tile jack cover and connect the camcorder to the inputs on the TV by using tile
supplied A/V connecting cable. Set the TV/VCR selector oil the TV to VCR.
Turn down the volume of the camcorder.
To get higher quality pictures in DV format, connect the camcorder to your TV using the S
video connecting cable (not supplied).
If you are going to connect the camcorder using the S video connecting cable (not supplied)
[al you do not need to connect the yellow (video) plug of the A/V connecting cable [b]
IN
@ S VIDEO
@ VIDEO
.%°°,o
_=_=Signal flow
(not supplied)
AI IDIO/VIDEO
If your VCR or TV is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR or the TV. If you
connect the white plug, the sound is L (left) signah If you connect the red ph/g, the soui'_d is
R (right) signah
5O