Sony Handycam Vision DCR-TRV9 Operating Instructions Manual page 20

You can monitor the playback picture on the LCD screen o1"in the viewfinder.
(1) Insert tile recorded tape with tile window facing out.
(2) Slide OPEN in the direction of tile arrow and open tile LCD panel.
(3) While pressing tile small green button on the POWER switch, set it to VTR.
(4) Press _ to rewind tile tape.
(5) Press I::_ start playback.
(6) Adjust the volume using VOL +/ and the brightness of the LCD screen using LCD
BRIGHT +/ .
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV or
VCR.
REW_-PLAY-@_ FF
(D O
1
DISPLAY
To stop playback, press [2.
To rewind the tape, press _1_1.
To fast-forward the tape rapidly, press I_1_.
Using the Remote Commander
You ran rontrol playb_rk using the supplied Remote Commander. Beflore using tbe Remote
Commander, insert the size AA (R6) batteries.
To display the LCD screen/viewfinder screenindicators
Press DISPLAY.
To erase the indicators, press again.
Notes on screenindicators
• Tbe srreen indicator disappears when the title is displayed.
• When you play back a tape using a "InIoLITHIUM" battery, _ndicates the remaining
batte U capacity. The remaining battery time in minutes is not displayed.
2O