Canon Optura Xi Instruction Manual page 166

L
Memory Card Operation
Problem Cause
Memory card cannot be Memory card was not facing
inserted, the correct direction.
Memory card cannot be Memory card is full.
recorded.
Memory card cannot be
played back.
Camcorder does not
display movies in CARD
PLAY (VCR) mode.
Image cannot be erased.
Memory card is not
formatted.
Memory card is not inserted.
File number reached
maximum value.
SD Memory Card is
protected.
Camcorder is not set to
CARD PLAY (VCR) mode.
Memory card is not inserted.
The camcorder displays the
still image playback mode.
The movie was recorded in
Motion JPEG format with
another camcorder.
Image is protected.
SD memory card is
protected.
Card error occurred.
Solution
Turn the memory card over
and reinsert it,
Replace the memory card or
erase
images,
Format the memory card.
Insert a memory card.
Set [FILE NUMBERS] to
[RESET] and insert a new
memory card.
Change the position of the
)rotect switch.
Set the camcorder to CARD
PLAY (VCR) mode.
Insert a memory card.
Press the CARD STILL/MOVIE
button to switch to MPEG4
movie playback.
Motion JPEG movies are
displayed in still image
playback mode. Press the
CARD STILL!MOVIE button
to switch to still image
playback.
Cancel the protection.
Change the position of the
)rotect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
_ersists.
_3
108
128
137
108
110
108
124
108
125
125
127
108
I_1 flashes red. 137
Printing
The printer is not The camcorder is set to 1. Set the camcorder to
operating even though NETWORK mode. CARD PLAY (VCR) mode.
camcorder and printer 2. Disconnect and reconnect
are correctly connected, the USB cable.
3. Turn off the printer and
turn it back on.
€.o
._o
"D O
166