Canon Optura Xi Instruction Manual page 150

L
m
t_
Including the Date in the Pdnt
1. In the print setting menu, turn the controller up,
down, to the right or left to select [Q ] and press
the controller in.
2. Turn the controller up or down to select [ON] and
press the controller in.
Tr:imming Se_ings ........................................................................................ ..........................................................................................
Set the print style before you start with the trimming settings.
1. In the print setting menu, press the controller up or
down to select [TRIMMING] and press the controller in.
The trimming frame appears.
2. Change the size of the trimming frame.
• Move the zoom lever toward T to shrink the frame, and toward
W to enlarge the frame.
• To cancel the trimming settings, move the zoom lever toward W until the trimming
frame disappears.
3. Move the trimming frame with the controller.
Pressingthe MENU button brings you back to the print settings menu.
C)About the color of the trimming frame (Canon Card Photo Printers only):
- White: No trimming settings.
Green: Recommended trimming size. (The trimming frame may not appear
in green depending on the image size, paper size or borders settings.)
Red: The image is magnified beyond recommended size. The image may
print out coarsely.
C)The trimming setting applies only to one image.
C)The trimming setting is canceled with the following operations:
- When you turn off the camcorder.
- When you disconnect the interface cable.
- When you expand the trimming frame beyond its maximum size.
150