About The Network Mode - Canon Optura Xi Instruction Manual

About the NETWORK Mode
The NETWORK mode is for use with DV Messenger version 2 (Windows XP only).
Set the camcorder to NETWORK mode and connect it to the computer using a USB
cable or DV 0EEE1394) cable.
For details on DV Messenger version 2, refer to the DV Network Software Instruction
Manual.
Do not connect the camcorder to a printer when the camcorder is set to
NETWORK mode.
_.O
.o
IO O
<_
Connection
First, install DV Messenger. If you wish to connect the camcorder using a USBcable,
you also need to install the Canon USBVideo Driver.
1. Connect the power adapter to the camcorder.
2. Press the small button below the POWER switch and turn the POWER
switch to NETWORK.
3. Connect the camcorder to the computer using a USB cable or DV cable.
• "NETWORK MODE" appears on the camcorder screen.
-°"1-°"1
USB Connection DV Connection
• When you have connected the camcorder to the computer, start DV Messenger. You
can now operate the camcorder from the computer using DV Messengen
C)When DV Messenger is started and set up for communication, the video
picture appears on the computer screen.
C) In NETWORK mode, the camcorder can only be operated from the computer,
except for the following functions:
When the DV Messenger [CAMERA] control panel is displayed: Zoom and
focus (when DV Messenger set to autofocus)
When the DV Messenger [VCR] control panel is displayed: Volume
adjustment of the built-in speaker
C) Following functions cannot be used with DV Messenger:
Image stabilizer
Built-in flash
C)The camcorder cannot be operated with the wireless controller.
152