Troubleshooting - Canon Optura Xi Instruction Manual

Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem
Camcorder will not turn
on.
The camcorder switches
off by itself.
Cassette compartment
will not open.
Cassette compartment
stopped during loading/
unloading.
Cause
Battery pack is exhausted.
Battery pack is not correctly
attached.
Battery pack is exhausted.
Power save function has
been activated.
Battery pack is exhausted.
Cassette compartment cover
is not fully open.
Battery pack is exhausted.
The camcorder
malfunctions.
Battery pack is exhausted.
Solution
Replace or charge the
battery pack.
Attach the battery pack
correctly.
Replace or charge the
battery pack.
Turn on the camcorder.
Replace or charge the
battery pack.
Open the cassette
compartment cover fully.
Replace or charge the
battery pack.
Consult a Canon Service
Center.
Replace or charge the
battery pack.
CO
15
15
15
28
16
22
16
LCD/viewfinder switches 15
on and off.
Re¢ording/Pmayback
Buttons will not work.
€.o
.o
"D O
Camcorder is not turned on.
Cassette is not loaded.
Battery pack is exhausted.
28
22
16
flashes on the
screen.
[] flashes on the screen. 162
"Remove the cassette" 22
appears on the screen.
51
Turn on the camcorder.
Load a cassette.
Replace or charge the
battery pack.
See reference page.
Unload and reload the
cassette.
Condensation is detected.
Camcorder stopped
operating to protect the
tape.
Camcorder and wireless
controller are not set to the
same remote sensor mode.
Batteries of the wireless
controller are exhausted.
The camcorder
malfunctions.
Change the remote sensor
modes.
Replace the batteries.
The wireless controller
will not work.
"_" flashes red on the Consult a Canon Service
screen. Center.
24
164