Cisco WS-C2950-12 Hardware Installation Manual page 79

Chapter 2 Installation
Repeat Steps 4 and 5 for the remaining three DC-input power source wires.
Step 6
Figure 2-29
Figure 2-29 Completed Wiring of Terminal Block Plug
Step 7 Insert the terminal block plug in the terminal block header on the switch rear panel
(see
Caution Secure the wires coming in from the terminal block so that they cannot be
disturbed by casual contact. For example, use tie wraps to secure the wires to the
rack.
78-11157-03
shows the completed wiring of a terminal block plug.
Figure 2-30).
Catalyst 2950 Desktop Switch Hardware Installation Guide
Connecting to DC Power
Return
Feed A
Negative
Return
Feed B
Negative
2-31