Cisco WS-C2950-12 Hardware Installation Manual page 73

Chapter 2 Installation
Using a Panduit crimping tool, crimp the ground lug to the 6-gauge wire.
Step 4
Figure 2-22 Crimping the Ground Lug
Use the two number-10-32 screws to attach the ground lug and wire assembly to
Step 5
the switch rear panel.
Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 lbf-in.
Step 6
(240 ounce-force inches [ozf-in.]).
78-11157-03
Catalyst 2950 Desktop Switch Hardware Installation Guide
Connecting to DC Power
2-25