Cisco WS-C2950-12 Hardware Installation Manual page 43

Chapter 1 Overview
If all LEDs on Catalyst 2950G-48-EI switches are green (no amber showing), the
switch is using 50 percent or more of the total bandwidth. If the LED for GBIC
module slot 2 is off, the switch is using more than 25 but less than 50 percent of
the total bandwidth. If LEDs for both GBIC module slots are off, the switch is
using less than 25 percent of the total bandwidth, and so on. (See
Figure 1-16 Bandwidth Utilization on Catalyst 2950-12, 2950-24, 2950C-24,
SYST
STAT
Figure 1-17 Bandwidth Utilization on Catalyst 2950G-12-EI Switches
78-11157-03
2950SX-24, and 2950T-24 Switches
1x 2x 3x 4x 5x 6x
RPS
UTIL DUPLX SPEED
MODE
0–0.0487%+
6.25–12.4%+
12.5–24%+
25–49%+
50%+
1 2 3 4 5 6 7 8 9 10
1X
SYST RPS
STAT UTIL DUPLX SPEED
2X
< 25% +
25% – 49% +
50% +
Catalyst 2950 Desktop Switch Hardware Installation Guide
10Base-T / 100Base-TX
7x 8x 9x 10x 11x 12x
11 12
11X
12X
Front-Panel Description
Figure 1-19.)
Catalyst 2950
SERIES
Catalyst 2950
1-19