Chapter 2
Installation
Mounting the Switch in a Rack
Figure 2-16 Mounting the Switch in a Rack
SYS T
1x
RPS
2x
3x
4x
STA T
5x
UTI L
DUP LX
SPE ED
MO DE
Number-12
Phillips machine
screws
Attaching the Optional Cable Guide
78-11157-03
After attaching the brackets, use the four Phillips machine screws to securely
attach the brackets to the rack, as shown in
To prevent the cables from obscuring the switch and other devices in the rack, you
can also attach the cable guide to the rack. See
Guide"
section for instructions.
6x
7x
8x
10 Ba se -T
9x
/ 10 0B as
10 x
e-T X
11 x
12 x
13 x
14 x
15 x
16 x
17 x
After mounting the switch in the rack, start the terminal-emulation software, and
provide power to the switch. See the
page 2-22
for instructions.
We recommend attaching the cable guide to prevent the cables from obscuring the
front panels of the switch and other devices installed in the rack. Use the supplied
black Phillips machine screw to attach the cable guide to the left or right bracket,
as shown in
Figure
2-17.
Figure
18 x
Ca ta ly st 29
19 x
50
20 x
SER IES
21 x
22 x
23 x
24 x
"Powering On the Switch" section on
Catalyst 2950 Desktop Switch Hardware Installation Guide
Installing the Switch in a Rack
2-16.
the"Attaching the Optional Cable
2-19