Displaying Explicit Path For Soft Pvc Connections - Cisco Catalyst 8540 MSR Configuration Manual

Configuring Soft PVCs with Explicit Paths
The configuration displayed for soft connections with explicit paths is always shown as two separate
Note
lines using the redo-explicit keyword on the second line, even if it is originally configured using a single
command line.

Displaying Explicit Path for Soft PVC Connections

To display a soft PVC connection successfully routed over an explicit path, use the following
EXEC command:
Command
show atm vc interface atm
card/subcard/port vpi vci
ATM Switch Router Software Configuration Guide
7-32
Chapter 7
Purpose
Displays the soft PVC connection status
including the PNNI explicit path routing
status for the last setup attempt.
Configuring Virtual Connections
OL-7396-01