Monitor Wireless Stations - NETGEAR WNDAP360 Reference

Table 18. System Screen Fields (Continued)
Field
Current Wireless Settings for 802.11n/a
Access Point Mode
Channel / Frequency
Rogue AP Detection

Monitor Wireless Stations

The Wireless Stations screen contains the Available Wireless Stations table. This table shows
all IP devices that are associated with the wireless access point in the wireless network that
is defined by the wireless network name (SSID). The table heading indicates the wireless
mode (802.11b, 802.11bg, or 802.11ng and 802.11a or 802.11na).
Note: A wireless network can include multiple wireless access points, all
using the same network name (SSID). This extends the reach of the
wireless network and allows users to roam from one wireless access
point to another, providing seamless network connectivity. Under
these circumstances, be aware that the Available Wireless Stations
table includes only the stations associated with this wireless access
point.

To view the attached wireless stations, and to view details for a wireless station:
1. Select Monitoring > Wireless Stations. The Wireless Stations screen displays:
ProSafe Dual Band Wireless-N Access Point WNDAP360
Description
The operating mode of the wireless access point. One of the following modes is
indicated:
• Access Point
• Point-to-Point Bridge
• Point-to-Point Bridge with Access Point
• Multi-Point Bridge with/without client association
For information about how to change the mode, see
page 89.
The channel the wireless port is using. For information about how to change the
channel and frequency, see
Enabled indicates that rogue AP detection is enabled; Disabled indicates that it is not.
Management
Configure Wireless Bridging
Configure 802.11a/na Wireless Settings
72
on
on page 27.