NETGEAR WNDAP360 Reference page 97

ProSafe Dual Band Wireless-N Access Point WNDAP360
g. Click Apply to save your security profile settings. The Bridging screen displays
again.
h. Repeat step b
For example, first configure security profile NETGEAR-WDS-1 with the MAC address
of AP2, and then configure security profile NETGEAR-WDS-2 with the MAC address
of AP3 (see Figure 56
3. Activate the wireless access point (AP1 on LAN Segment 1 in
a point-to-multipoint bridge (that is, it is the master in the wireless network):
a. On the Bridging screen, select the Enable Wireless Bridging check box.
b. Select the Wireless Point-to-Multi-Point Bridge radio button.
c. Select the Enable Wireless Client Association check box to enable wireless client
association.
Note: If you do not select the Enable Wireless Client Association check
box, the wireless access point will not function in point-to-multipoint
bridge but in repeater mode.
d. If the correct profile names and security options are displayed in the table, select the
check boxes in the Enable column for all security profiles that you want to enable.
e. Click Apply in the Bridging screen to activate your point-to-multipoint bridge
settings.
4. Configure AP2 on LAN Segment 2 (see
with the remote MAC address of AP1.
5. Configure AP3 on LAN Segment 3 (see
with the remote MAC address of AP1.
6. Verify the following for all wireless access points:
• Only AP1 on LAN Segment 1 is configured in point-to-multipoint bridge mode, and all
others APs are configured in point-to-point bridge mode.
• AP2 and AP3 (the point-to-point APs) needs to have AP1's MAC address in their
Remote MAC Address field.
• All APs need to be on the same LAN, that is, the LAN IP addresses of all APs need to
be in the same network as the LAN devices.
• If you use DHCP, all wireless access points need to obtain an IP address
automatically (as a DHCP client). For more information, see
and Optional DHCP Server Settings
• All wireless access points need to use the same channel, authentication mode, and
security settings.
7. Verify connectivity across the LANs:
• A computer on any LAN segment should be able to connect to the Internet or share
files and printers with any other PCs or servers connected to any of the three LAN
segments.
through step g for any other security profile that you want to edit.
on page 94).
Figure 56
Figure 56
on page 21.
Advanced Configuration
97
Figure 56
on page 94) in point-to-point bridge mode
on page 94) in point-to-point bridge mode
Configure IP Settings
on page 94) as