NETGEAR WNDAP360 Reference page 73

ProSafe Dual Band Wireless-N Access Point WNDAP360
Figure 43.
To update the list, click Refresh. If the wireless access point is rebooted, the wireless
station data is lost until the wireless access point rediscovers the devices. To force the
wireless access point to look for associated devices, click Refresh.
There is an Available Wireless Stations table for each selected 2.4-GHz and 5-GHz radio
mode. For each radio mode, the Available Wireless Stations table shows for each device
the MAC address, BSSID, SSID, channel, rate, state, type, AID, mode, and status. For
information about these and more fields, see the following table.
2. To view details of a wireless station, select the corresponding radio button, and then click
Details. The Wireless Stations Details screen displays:
Figure 44.
Management
73